1c886eec3f117ca9c62a68ab992eb365d97c34ec
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
de408e4b7f |
the surface: CLI verbs, the module's options, and three checks the compositor votes in
Everything below the CLI was merged and green against fakes; none of it was
reachable and none of it had ever met a compositor. This wires it up and then
puts the compositor in a position to disagree.
CLI (src/hhstream/cli.py, src/hhstream_session/**)
session container [ID], session reconcile [ID], and the seven pointer verbs
from PLAN §9. `start` still prints the bare session id and nothing else.
`list` gains WS / OUTPUT / POINTER, with the gap marker where a value is
genuinely unknown rather than a blank that reads as zero -- the POINTER
column needs a second, read-only `pointer.state` call because the `list`
reply carries no lease state.
The lease id is cached in `hhstream_session.lease` (under
$XDG_RUNTIME_DIR), because PLAN §9's gesture verbs take no --lease and the
wire requires a lease_id on every one of them; --lease and $HHSTREAM_LEASE
override it, and a `no_lease` refusal drops the stale entry.
Exit codes are the contract's: a gesture with no lease is 9 and never
reaches the broker, and a compositor failure is 10 with a message that says
the session is still running. `kill` now warns about
`session.container_survivors` -- windows the compositor still shows -- and
distinguishes `null` ("could not ask") from `[]`.
`shot`/`record --output NAME` capture one container through `grim -o`; the
frame socket publishes the main output only, so it cannot do it.
Module (nix/module.nix)
sessions.containers.{enable,max,mode,workspaceBase},
sessions.pointer.{enable,leaseTtl,leaseMax}, rendered into the generated
TOML with §10's key names. hhstream-pointer.service: the operator's account,
supplementary group hhstream, After=/BindsTo= the compositor,
Restart=on-failure, KillMode=process, and the command line §3.4 freezes.
tmpfiles for /run/hhstream plus RuntimeDirectoryPreserve on the broker,
without which restarting the broker deletes the driver's socket out from
under it. The runtime-directory length assertion is untouched.
And ExecStartPost on the compositor, opening its IPC directory to its own
group: Hyprland creates <runtime>/hypr with S_IRWXU, so the broker -- a
different account by design -- could not reach the request or event socket
at all, and degraded silently exactly as it is built to.
Checks (checks/**)
vm-ipc: both sockets at their frozen names, measured against sun_path's 108
bytes, and a socket2 subscriber that receives an openwindow for a window the
test creates. The subscriber is the shipped HyprlandIPC, not a second
implementation: this check exists to prove that this client hears this
compositor.
vm-containers: one hh-* output per session at the container mode, the window
on it, a second window of the same application beside it, an unmatched
window quarantined, grim -o isolating one container, teardown removing the
output and freeing the slot. PLAN experiment 3 is answered: `hyprctl output
create headless` works.
vm-pointer: a version-2 virtual pointer, a warp and a click whose
coordinates the *application* reports, BUSY naming the holder, an expired
lease swept with its held button lifted, and a broker restart that leaves
the lock free, the bookmark intact and the driver reachable.
checks/lib gains the guest the three share, their test-script helpers (no
assertions live there), an event-socket subscriber and a Wayland client that
says where it was clicked -- nothing in nixpkgs both honours
$HHSTREAM_APP_ID and reports pointer events.
Reported, not worked around: the broker reads none of the container or
pointer config (policy.py takes [defaults] and [apps] only), `start` has no
no_container field so --no-container is refused rather than silently ignored,
and nix/hyprland-conf.nix sets input:follow_mouse = 0, which sends pointer
events to the focused window only -- measured, with the cursor at the aimed
pixel and no client told. README.dev.md has the evidence for each.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQy29x9AfHWyzNd1f7XPGK
|
||
|
|
129430bffd |
wire the broker to the compositor, containers and pointer
The four slices existed and nothing called them. Now the broker builds a
spatial container per session, reads back what the compositor actually did,
and aims the cursor into one container under a broker-wide lease.
Record schema 3 (registry.py): `container` {output, workspace, mode,
created_by, state}, `pointer` {bookmark, last_released_at, released_by} and
the compositor's `signature`. A v2 record is migrated on load, not refused —
its application is still running. Every field that could not be verified is
null; `container: null` means "no container", never "probably something".
Containers (new container_host.py, manager.py, launcher.py): `start`
allocates a slot from `WorkspaceAllocator`, runs `container_plan()`'s argv,
launches the app with the container stamp in its environment, then reads the
workspace, output and window back out of `clients -j`. Teardown removes the
output, releases the slot and reports survivors rather than claiming success
— and runs for an unprompted exit and for `gc` too, so no container is ever
left unattended. Broker start-up reconciles: adopt `hh-*` outputs a live
session claims, remove the rest, `contains_output()` being the only filter.
No IPC means `container: degraded` and lifecycle verbs unchanged.
The plans' argv are dispatched over the compositor's request socket rather
than by executing `hyprctl`, which is what hyprctl does with the same words;
the reply is checked, so a refused command is not recorded as a container.
Pointer (new driver.py, manager.py): a client for the driver's private
socket, and `pointer.acquire|move|button|click|release|state` on top of
`PointerLease`. The broker owns the lease, the driver executes. The bookmark
is marked on every move and before release and stored in the record, so it
survives a restart. On expiry `pressed()` is read before `expire()` and
`release_all` goes to the driver, because the lease cannot lift a button
itself; a sweep runs unprompted so the TTL is a promise.
containers.py to v2: `quarantine_plan()` -> `quarantine_argv()`, with the
before-any-per-session-rule ordering stated where the caller could get it
wrong. protocol.py: 9 NO_LEASE, 10 COMPOSITOR, the verb table, and the
`request_id` cache moved out of the server so the CLI agrees with it.
Tests: real AF_UNIX everywhere — a stateful fake compositor and the shipped
pointer driver behind a recording sink. No mocked sockets, no compositor, no
VM. 551 -> 693.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017mUq7QvQ9EZb2Wi35xj4cs
|
||
|
|
20b2aee109 |
unit check: run the whole tests/ tree, not just tests/unit
The check took ../tests/unit alone, so the broker's, the pointer driver's and the sessions suites were collected by no check at all -- 432 of 551 tests ran only when someone happened to enter the dev shell. It now takes ../tests, which surfaced two real defects in the harness rather than in the code: - tests/sessions/integration/test_lifecycle.py locates the repository by looking upward for a pyproject.toml, which a build has no reason to contain; it raised at import and took the whole run down as a collection error. The check now copies the marker in, which is what the test documents it needs. - That file also REPLACED PYTHONPATH for the daemon it spawns instead of prepending to it. In a checkout src/ is the package, so it worked; under a build it discarded the package under test, and 'python -m hhstreamd' died at startup with an ImportError -- reported as a daemon failure on every test in the file. Prepending is the fix, and the right behaviour anywhere. pywayland joins the test environment because the pointer driver imports it. unit: 551 collected, 550 passed, 1 skipped (a deliberate skip). |
||
|
|
d45219994e |
tests: make the test basenames unique so the whole tree collects
The union of main and the four slices cannot be collected by pytest: an import-file-mismatch on test_protocol.py (the frame wire's, the broker's) and test_server.py (the frame server's, the pointer driver's). Per-directory runs never hit it, so this is what the union run is for. The tempting fix is --import-mode=importlib, and it is wrong: importlib does not put a test file's directory on sys.path, which the slices' tests rely on for sibling imports (from conftest import HANG, from test_ops import RecordingSink). That trades a collection error for an ImportError. Renaming the two colliding modules keeps the import behaviour and fixes the actual problem: tests/pointer/test_server.py -> test_pointer_server.py tests/sessions/unit/test_protocol.py -> test_broker_protocol.py tests: 551 passed. |
||
|
|
30f456c07e |
integrate the session broker: one CLI, a module unit, and a VM check
M0 of the sessions design, wired into the flake and gated by a real check. What is here now: - `src/hhstreamd/` — the broker: session registry, lifecycle verbs, process-group teardown, app allowlist, audit log, idle reaper on CLOCK_BOOTTIME. - `src/hhstream_session/` — the CLI handlers, registered into the one front door. - `src/hhstream/cli.py` — `hhstream status|shot|run|record|session …`, so the frame verbs and the session namespace are one binary. - `nix/module.nix` — `sessions.*` options and the `hhstream-sessions.service` unit: the operator's own account (never a service account, because launched applications should see that account's home), the compositor's group as a supplementary group (without it a launched GUI client cannot open the Wayland socket), the generated app allowlist, and `--compositor-runtime-dir` so applications are handed the compositor's session rather than the broker's. - `checks/vm-sessions.nix` — 18 subtests on a real compositor in a VM. Two bugs found by driving it, both fixed: - BUG-01: launched applications could not reach the compositor at all — the broker spawned them with its own inherited environment, which names the login session. `hhstreamd/compositor.py` discovers the socket and builds the child environment; a directory with no usable socket is a startup refusal, not a warning. - BUG-02: `kill` refused to signal a live application and said nothing was wrong. The identity gate hashed `/proc/<pid>/cmdline`, which every `execve` replaces — and on NixOS applications are reached through wrapper scripts that do exactly that. The gate now rests on `starttime` (+ boot id, + session id where it is immutable) and records command-line drift as evidence of nothing. KillMode=process is set on the unit on purpose: the default control-group kill would take the applications down with the broker, which would make adoption and a broker restart pointless. |