Commit Graph
6 Commits
Author SHA1 Message Date
HermenixandClaude Opus 5 887ed17be2 docs(stream): mcp-v3, the seventh box, and two TODOs the check wrote
`docs/CONTRACT-mcp.md` goes to mcp-v3 with a change table: two tools, two
resources, three `session_start` arguments, and the one rule that is not a name
at all -- a connected viewer is the single exception to the idle-clock rule, and
it cannot be invoked, so it is documented in §6 rather than offered in §3. v3 is
additive; every v2 name still means what it meant.

README.md leads the stream with the shape of it rather than the options: one
port for the machine, a phrase per session, a browser `<img>` as the entire
client, and the four things worth knowing before switching one on -- that it is
per session and off by default, that the phrase survives a restart, that capture
runs only while somebody is connected, and that watching counts as activity.
The phrase is called what it is: the only protection, with no TLS and no second
factor.

ARCHITECTURE.md gains the fourth unit as a seventh box -- `hhstream-live`,
hanging off the broker by `live.sock` with one port and a browser at the end of
it -- and the counts move to 23 and 10.

Two TODOs, both written by `checks/vm-stream.nix`:

* `a-stream-that-gave-up-still-reports-attached.md`. The publisher stops a
  stream after ten consecutive capture failures and the stop is sticky on
  purpose, but `Control._describe` does not pass `stopped` on, so
  `_stream_public` reports `attached: true` for a capture that has permanently
  given up. That is the second place `attached` answers "is a capture running
  right now" wrongly, and a field that is right only when nothing is wrong is
  not worth reading.
* `capture-binary-and-the-unit-path.md` is now half fixed, and says so. The
  module passes grim's store path and this check reads real frames -- which
  immediately found the sibling fault, the unit's missing `XDG_RUNTIME_DIR`.
  What is still open is the other half: the app resolves its capture command by
  name and never checks it, so any deployment that is not this module still
  discovers a broken capture ten failures later.

The plan's status section records Stage 2 and Stage 3 as built, the two
decisions §5 left open (that `start` takes `--stream`, and that the default rate
is the daemon's), and what Stage 2 deliberately did not do -- §6's restart
re-attachment, which has its own TODO.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011ZeH65zd6pFTgBSu52W9PE
2026-10-11 22:54:26 +00:00
HermenixandClaude Opus 5 e636472106 docs(mcp)!: mcp-v2, and the two limits the SDK imposes on it
`docs/CONTRACT-mcp.md` goes to mcp-v2 with a change table at the top, because
v1 lasted a day and an agent that learned it deserves to be told what moved
rather than to discover it. The new §4 freezes the resource surface: the eight
URIs, their bodies, their query parameters, and the five rules the layer keeps
(a read never writes; only declared parameters; a literal route beats a
template; a frame's media type comes from its bytes; no subscriptions). §6
gains the other half of the error mapping -- for a resource read every exit
code arrives as `-32602` with the remedy in `message` and the structured object
in `data`, because `ReadResourceResult` has no `isError` to use instead.

§2 records what `--toolsets` is and is not: there is no grouping primitive in
MCP, the `Tool` object has nowhere to put a family, and tools are a flat list
in the specification too -- so the only lever is which tools the server lists,
decided by whoever spawns it.

README.md leads with the split rather than with a tool count, since that is the
thing a reader has to understand before any of the names make sense, and shows
the `--toolsets` form for a client with a tight budget. ARCHITECTURE.md's sixth
box grows its second half and says why `shot` is on both sides.

A second TODO, `mcp-resources-cannot-be-subscribed-to.md`, records the limit
that cost the most: `Server.get_capabilities` hardcodes
`ResourcesCapability(subscribe=False, …)`, so registering a
`subscribe_resource` handler changes nothing and a client is correctly told not
to try. Subscriptions would have been the principled answer to the missing
`logs --follow` -- it is the one place this design wanted a capability the SDK
will not advertise -- so the file names the one-line local override, says what
it risks, and recommends upstreaming the real fix.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011ZeH65zd6pFTgBSu52W9PE
2026-10-11 11:50:12 +00:00
HermenixandClaude Opus 5 6a40c7e2e4 docs(mcp): freeze the tool surface, and record what the in-process seam costs
`docs/CONTRACT-mcp.md` (mcp-v1) is the new interface, written the way this
repository writes interfaces: the tool names, the arguments each takes, the
flag form, what is deliberately absent and why, and a row per exit code saying
what it arrives as and what an agent should do about it. An agent that has
learned these names is a consumer like any other, so renaming one needs a
version bump.

README.md gains the section an operator reads: the `mcp.enable` option, the
`mcpServers` block to register it with, why both environment variables are
shown at their defaults, and what to do when `shot` cannot read the frame
socket. README.dev.md gains the `nix build .#hhstream-mcp` half of the build
section, the `vm-mcp` row, the new files in the layout, and the reason `mcp` is
in the unit check's environment. ARCHITECTURE.md gains the sixth box, drawn
above the CLI rather than beside the broker, because that is where it sits.

`docs/TODO/mcp-in-process-has-no-call-deadline.md` records the two things the
in-process seam costs, rather than leaving them to be rediscovered. A thread
cannot be interrupted, so there is no per-call deadline and a wedged call
queues every later one behind it; and `cli.main`'s `sg` re-exec is an `exec`
this server cannot perform, so a frame verb that cannot read the socket fails
where the CLI would have recovered. The second is the one an operator meets
first -- the CLI works from their shell and the tool does not -- which is why
the failure says what the CLI would have done and how to not need it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011ZeH65zd6pFTgBSu52W9PE
2026-10-11 06:33:07 +00:00
HermenixandClaude Opus 5 de408e4b7f the surface: CLI verbs, the module's options, and three checks the compositor votes in
Everything below the CLI was merged and green against fakes; none of it was
reachable and none of it had ever met a compositor. This wires it up and then
puts the compositor in a position to disagree.

CLI (src/hhstream/cli.py, src/hhstream_session/**)

  session container [ID], session reconcile [ID], and the seven pointer verbs
  from PLAN §9. `start` still prints the bare session id and nothing else.
  `list` gains WS / OUTPUT / POINTER, with the gap marker where a value is
  genuinely unknown rather than a blank that reads as zero -- the POINTER
  column needs a second, read-only `pointer.state` call because the `list`
  reply carries no lease state.

  The lease id is cached in `hhstream_session.lease` (under
  $XDG_RUNTIME_DIR), because PLAN §9's gesture verbs take no --lease and the
  wire requires a lease_id on every one of them; --lease and $HHSTREAM_LEASE
  override it, and a `no_lease` refusal drops the stale entry.

  Exit codes are the contract's: a gesture with no lease is 9 and never
  reaches the broker, and a compositor failure is 10 with a message that says
  the session is still running. `kill` now warns about
  `session.container_survivors` -- windows the compositor still shows -- and
  distinguishes `null` ("could not ask") from `[]`.

  `shot`/`record --output NAME` capture one container through `grim -o`; the
  frame socket publishes the main output only, so it cannot do it.

Module (nix/module.nix)

  sessions.containers.{enable,max,mode,workspaceBase},
  sessions.pointer.{enable,leaseTtl,leaseMax}, rendered into the generated
  TOML with §10's key names. hhstream-pointer.service: the operator's account,
  supplementary group hhstream, After=/BindsTo= the compositor,
  Restart=on-failure, KillMode=process, and the command line §3.4 freezes.
  tmpfiles for /run/hhstream plus RuntimeDirectoryPreserve on the broker,
  without which restarting the broker deletes the driver's socket out from
  under it. The runtime-directory length assertion is untouched.

  And ExecStartPost on the compositor, opening its IPC directory to its own
  group: Hyprland creates <runtime>/hypr with S_IRWXU, so the broker -- a
  different account by design -- could not reach the request or event socket
  at all, and degraded silently exactly as it is built to.

Checks (checks/**)

  vm-ipc: both sockets at their frozen names, measured against sun_path's 108
  bytes, and a socket2 subscriber that receives an openwindow for a window the
  test creates. The subscriber is the shipped HyprlandIPC, not a second
  implementation: this check exists to prove that this client hears this
  compositor.

  vm-containers: one hh-* output per session at the container mode, the window
  on it, a second window of the same application beside it, an unmatched
  window quarantined, grim -o isolating one container, teardown removing the
  output and freeing the slot. PLAN experiment 3 is answered: `hyprctl output
  create headless` works.

  vm-pointer: a version-2 virtual pointer, a warp and a click whose
  coordinates the *application* reports, BUSY naming the holder, an expired
  lease swept with its held button lifted, and a broker restart that leaves
  the lock free, the bookmark intact and the driver reachable.

  checks/lib gains the guest the three share, their test-script helpers (no
  assertions live there), an event-socket subscriber and a Wayland client that
  says where it was clicked -- nothing in nixpkgs both honours
  $HHSTREAM_APP_ID and reports pointer events.

Reported, not worked around: the broker reads none of the container or
pointer config (policy.py takes [defaults] and [apps] only), `start` has no
no_container field so --no-container is refused rather than silently ignored,
and nix/hyprland-conf.nix sets input:follow_mouse = 0, which sends pointer
events to the focused window only -- measured, with the cursor at the aimed
pixel and no client told. README.dev.md has the evidence for each.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQy29x9AfHWyzNd1f7XPGK
2026-10-03 06:58:44 +00:00
Hermenix 30f456c07e integrate the session broker: one CLI, a module unit, and a VM check
M0 of the sessions design, wired into the flake and gated by a real check.

What is here now:

- `src/hhstreamd/` — the broker: session registry, lifecycle verbs, process-group
  teardown, app allowlist, audit log, idle reaper on CLOCK_BOOTTIME.
- `src/hhstream_session/` — the CLI handlers, registered into the one front door.
- `src/hhstream/cli.py` — `hhstream status|shot|run|record|session …`, so the
  frame verbs and the session namespace are one binary.
- `nix/module.nix` — `sessions.*` options and the `hhstream-sessions.service`
  unit: the operator's own account (never a service account, because launched
  applications should see that account's home), the compositor's group as a
  supplementary group (without it a launched GUI client cannot open the Wayland
  socket), the generated app allowlist, and `--compositor-runtime-dir` so
  applications are handed the compositor's session rather than the broker's.
- `checks/vm-sessions.nix` — 18 subtests on a real compositor in a VM.

Two bugs found by driving it, both fixed:

- BUG-01: launched applications could not reach the compositor at all — the
  broker spawned them with its own inherited environment, which names the login
  session. `hhstreamd/compositor.py` discovers the socket and builds the child
  environment; a directory with no usable socket is a startup refusal, not a
  warning.
- BUG-02: `kill` refused to signal a live application and said nothing was
  wrong. The identity gate hashed `/proc/<pid>/cmdline`, which every `execve`
  replaces — and on NixOS applications are reached through wrapper scripts that
  do exactly that. The gate now rests on `starttime` (+ boot id, + session id
  where it is immutable) and records command-line drift as evidence of nothing.

KillMode=process is set on the unit on purpose: the default control-group kill
would take the applications down with the broker, which would make adoption and
a broker restart pointless.
2026-10-01 12:23:16 +00:00
Hermenix db886faa38 docs: pin the server command line in the contract; add ARCHITECTURE.md 2026-09-28 11:53:19 +00:00