Commit Graph
6 Commits
Author SHA1 Message Date
HermenixandClaude Opus 5 b4abd085cc test(stream): both ends of live.sock, the broker's verbs, and a real viewer in a guest
Three layers, because the stream has three and each one can be wrong on its own.

`tests/live/test_live_control.py` (20 tests) runs `Control` against a fake
capture: the four ops, `attach` idempotent on the phrase, the same phrase aimed
at another output refused, a malformed phrase refused *without the value in the
message*, and `fps` defaulting to the daemon's when the broker sends none.

`tests/sessions/unit/test_stream_verbs.py` (24 tests) runs the broker against a
fake daemon, and its subjects are the decisions rather than the plumbing: no
container output is a refusal and never a fallback to the main output; a
re-`enable` returns the same phrase and a different one is exit 8; a down daemon
turns `attached` false rather than failing a read; the sweep touches a watched
session and leaves an unwatched one alone; teardown detaches before the
container is destroyed.

`tests/unit/test_mcp_*` grow the two tools, the two resources and the three
`session_start` arguments, with the read-only half asserted *absent* as a tool
by name -- re-adding one should be a failure, not a silent widening.

`checks/vm-stream.nix` is the new guest check, and it exists for the two things
none of the above can say:

1. **That `grim` captures a real compositor from inside a unit.** It reads
   actual JPEGs off `/<phrase>/stream.mjpg` with `checks/lib/mjpeg_read.py`, a
   hand-rolled multipart reader that shares no code with the server -- a parser
   that did could not tell you the boundary was wrong. It framed on SOI/EOI
   rather than `Content-Length` for the same reason. This is what caught the
   unit's missing `XDG_RUNTIME_DIR`: `frames: [25827, 25827, 25827]` now, ten
   capture failures and a stream that gave up before.
2. **That a connected viewer moves the idle clock.** That needs the broker's
   real sweep, on a real timer, with a client genuinely still there a minute
   later -- hence `--hold`, and hence a check that spends ~90 seconds twice. The
   negative control runs first, because if the sweep touched an unwatched stream
   the positive case would pass for the wrong reason. Measured in the guest:
   with nobody watching `580s -> 502s` remaining, with a viewer `499s -> 596s`.

It also asserts the phrase is in neither the audit log nor a 404 body, that the
old URL stops serving after `disable`, that `disable` then `enable` rotates it,
that `kill` takes the stream down and leaves the daemon up, and that
`start --stream` yields an id and a URL that serves frames.

No clock is injected anywhere in this check. An injected one would prove the
arithmetic, which the unit tests already do, and not the daemon.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011ZeH65zd6pFTgBSu52W9PE
2026-10-11 22:49:18 +00:00
HermenixandClaude Opus 5 bd3ca2e644 fix(live): hhstream-live with no subcommand serves, and SIGTERM stops it
`cmd_serve` read `args.capture_command`, which only exists on the `serve`
subparser, so a bare `hhstream-live` died with an `AttributeError`. The word
`serve` is now inserted before parsing rather than defaulted afterwards: the
top-level parser would otherwise reject `hhstream-live --port 9999` for an
unknown option before anything could be filled in. `--help` is left alone so
it still shows the program's own help. `--log-level` gained a copy on each
subparser, defaulting to `SUPPRESS` so that naming the subcommand does not
reset it.

SIGTERM had no handler, so the default action killed the process and
`server.stop()` never ran -- the exit status was a signal, not a 0. The
handler is installed before the listener is bound, so a supervisor's first
signal is never the fatal one.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URhyHGQnmKH9zBXxoznfQY
2026-10-06 16:20:00 +00:00
HermenixandClaude Opus 5 a9299682d2 fix(live): bound connections, a delimited stream, and a quiet access log
Four things the HTTP side owed.

A connection had no read timeout, so a client that connected and sent
nothing held a handler thread in `readline` for ever -- and on the MJPEG
route it also held a viewer slot, which keeps grim running for nobody.
Handlers now carry a 15 s header timeout, cleared once the MJPEG headers
are out because from there the wait is on frames, not on the client. TCP
keepalive covers the other half: a black-holed viewer that never closes.

The MJPEG response had no `Content-Length`, no chunked encoding and no
`Connection: close` -- `close_connection = True` was set after
`end_headers()`, so it never became a header. An intermediary was entitled
to buffer the whole thing waiting for an EOF that never comes.

`log_message` formatted the request line, which is the phrase, at debug
level; so did the client-error line. Both now log the method, the status
and the peer, never the path.

`RateLimiter` pruned only the key it was asked about, so every source
address that ever missed stayed in the table for the life of the process --
a leak any LAN host could drive. The sweep now covers the table.

Finally, `LiveServer` says where it is really bound: `address` still
returns something dialable, and `describe_bind` is what names `0.0.0.0` as
all interfaces.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URhyHGQnmKH9zBXxoznfQY
2026-10-06 16:19:50 +00:00
HermenixandClaude Opus 5 19338af17c fix(live): a phrase is four plain words and a tail, and nothing weaker
Two holes in the one credential a stream has.

The wordlist has four hyphenated entries (`drop-down`, `felt-tip`,
`t-shirt`, `yo-yo`). A phrase drawn from one is six tokens --
`abacus-drop-down-lantern-harbor-7k2qp` -- and a listener cannot hear where
the tail starts. `words()` now keeps only `^[a-z]+$`; 7772 words costs
0.003 bits, so the ~77.5-bit figure is unchanged. The shape test asserted
over 50 draws, which caught this about a tenth of the time; the property is
now asserted over the whole list.

`validate` accepted `a-b-c`. It is what an operator-supplied `--phrase` is
checked against, so everything it accepts is a password someone can choose
for a LAN-facing stream. The floor is now exactly what `generate` produces:
four `[a-z]{3,}` words and a five-character `[a-z0-9]` tail. The router
still looks phrases up without validating, so an unknown phrase is the same
empty 404 it was.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URhyHGQnmKH9zBXxoznfQY
2026-10-06 16:19:41 +00:00
HermenixandClaude Opus 5 52e3786bfb fix(live): a dead output stops the stream even after a good frame
The failure cap read `consecutive_failures >= FAILURE_LIMIT and captured ==
0`, so it could only ever fire on a cold start. An output removed while
someone was watching -- grim answering "unknown output" to every grab from
then on -- kept the loop retrying twice a second for as long as the viewer
held the page open. That is the busy loop the cap exists to stop, so the
count is now of failures in a row and nothing else. Giving up stays sticky:
a removed output does not come back, and re-enabling the session is how it
returns.

While here, the capture thread is named for its output and the give-up is
logged by output. The phrase is the stream's only credential, and
faulthandler, `threading.excepthook` and any sampling profiler all print
thread names.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URhyHGQnmKH9zBXxoznfQY
2026-10-06 16:19:32 +00:00
Hermenix 9744d35945 feat(live): one port, a router, and a phrase per session (stage 1)
The session-stream web app: a single HTTP listener (9988) that serves a page
per enabled session, keyed by a spoken phrase. Off by default, so a stream
exists only for the sessions it was enabled on.

  src/hhstream_live/phrase.py     four EFF-large words + a 5-char base-36 tail
                                  (~77.5 bits); the phrase is the password
  src/hhstream_live/publisher.py  one capture thread + one frame slot per
                                  output; one slot/no queue; capture paused at
                                  zero viewers
  src/hhstream_live/server.py     the router: /, /<phrase>/, /stream.mjpg,
                                  /frame.jpg, /status.json; unknown phrase is
                                  an empty 404, rate-limited
  src/hhstream_live/pages.py      the built-in dark pages (no CDN, no build)
  src/hhstream_live/__main__.py   hhstream-live serve|phrase, standalone

The root page is a form, never a list: the phrase is known only by whoever
enabled the stream. Transport is MJPEG (multipart/x-mixed-replace), reusing
the JPEG grim already produces. Not yet wired to the broker -- that is
stage 2. Tests: tests/live (51).
2026-10-06 13:32:00 +00:00