Everything below the CLI was merged and green against fakes; none of it was
reachable and none of it had ever met a compositor. This wires it up and then
puts the compositor in a position to disagree.
CLI (src/hhstream/cli.py, src/hhstream_session/**)
session container [ID], session reconcile [ID], and the seven pointer verbs
from PLAN §9. `start` still prints the bare session id and nothing else.
`list` gains WS / OUTPUT / POINTER, with the gap marker where a value is
genuinely unknown rather than a blank that reads as zero -- the POINTER
column needs a second, read-only `pointer.state` call because the `list`
reply carries no lease state.
The lease id is cached in `hhstream_session.lease` (under
$XDG_RUNTIME_DIR), because PLAN §9's gesture verbs take no --lease and the
wire requires a lease_id on every one of them; --lease and $HHSTREAM_LEASE
override it, and a `no_lease` refusal drops the stale entry.
Exit codes are the contract's: a gesture with no lease is 9 and never
reaches the broker, and a compositor failure is 10 with a message that says
the session is still running. `kill` now warns about
`session.container_survivors` -- windows the compositor still shows -- and
distinguishes `null` ("could not ask") from `[]`.
`shot`/`record --output NAME` capture one container through `grim -o`; the
frame socket publishes the main output only, so it cannot do it.
Module (nix/module.nix)
sessions.containers.{enable,max,mode,workspaceBase},
sessions.pointer.{enable,leaseTtl,leaseMax}, rendered into the generated
TOML with §10's key names. hhstream-pointer.service: the operator's account,
supplementary group hhstream, After=/BindsTo= the compositor,
Restart=on-failure, KillMode=process, and the command line §3.4 freezes.
tmpfiles for /run/hhstream plus RuntimeDirectoryPreserve on the broker,
without which restarting the broker deletes the driver's socket out from
under it. The runtime-directory length assertion is untouched.
And ExecStartPost on the compositor, opening its IPC directory to its own
group: Hyprland creates <runtime>/hypr with S_IRWXU, so the broker -- a
different account by design -- could not reach the request or event socket
at all, and degraded silently exactly as it is built to.
Checks (checks/**)
vm-ipc: both sockets at their frozen names, measured against sun_path's 108
bytes, and a socket2 subscriber that receives an openwindow for a window the
test creates. The subscriber is the shipped HyprlandIPC, not a second
implementation: this check exists to prove that this client hears this
compositor.
vm-containers: one hh-* output per session at the container mode, the window
on it, a second window of the same application beside it, an unmatched
window quarantined, grim -o isolating one container, teardown removing the
output and freeing the slot. PLAN experiment 3 is answered: `hyprctl output
create headless` works.
vm-pointer: a version-2 virtual pointer, a warp and a click whose
coordinates the *application* reports, BUSY naming the holder, an expired
lease swept with its held button lifted, and a broker restart that leaves
the lock free, the bookmark intact and the driver reachable.
checks/lib gains the guest the three share, their test-script helpers (no
assertions live there), an event-socket subscriber and a Wayland client that
says where it was clicked -- nothing in nixpkgs both honours
$HHSTREAM_APP_ID and reports pointer events.
Reported, not worked around: the broker reads none of the container or
pointer config (policy.py takes [defaults] and [apps] only), `start` has no
no_container field so --no-container is refused rather than silently ignored,
and nix/hyprland-conf.nix sets input:follow_mouse = 0, which sends pointer
events to the focused window only -- measured, with the cursor at the aimed
pixel and no client told. README.dev.md has the evidence for each.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQy29x9AfHWyzNd1f7XPGK
8.8 KiB
Architecture
┌──────────────────────────────────────────┐
│ hyprland-headless.service │
│ Hyprland 0.56.2, no physical monitor │
│ private XDG_RUNTIME_DIR, as `user` │
│ outputs come from `outputs[]` │
│ + one headless output per session │
└───┬───────────┬───────────────┬──────────┘
│ │ │
IPC: request / │ │ Wayland │ Wayland
event sockets │ │ session │ (virtual pointer)
│ ▼ │
│ ┌────────────────────────┴─────────┐
│ │ hyprland-headless-stream.service │
│ │ hhstream-server │
│ │ capture ──▶ one frame slot │
│ │ accept ──▶ thread per client│
│ └───────────────┬──────────────────┘
│ │ AF_UNIX, mode 0660
│ ▼
│ many clients ── hhstream-client / any reader
│
┌────────────┴──────────────┐ ┌──────────────────────────┐
│ hhstream-sessions.service │─────▶│ hhstream-pointer.service │
│ hhstreamd │ │ one Wayland connection │
│ registry, containers, │ JSON │ one virtual pointer │
│ the pointer lease │ over │ per output │
└────────────┬──────────────┘ a └──────────────────────────┘
│ private socket
│ AF_UNIX control.sock, mode 0660
▼
hhstream session ... (the CLI an agent drives)
Five pieces, deliberately separate:
- The compositor (
Hyprland, unchanged upstream) renders into virtual outputs. It knows nothing about frames on a socket. - The frame server (
hhstream) captures, holds exactly one frame, and publishes it. It owns the socket, the framing and the drop policy. - The client is any process that can open a Unix socket and read the
contract's byte format. The shipped
hhstream-clientis a convenience, not a requirement. - The session broker (
hhstreamd) starts allowlisted applications as tracked sessions, gives each one its own headless output and workspace (a container), reads the compositor back over its own IPC, and owns the pointer lease. It is the only part that keeps state across a restart. - The pointer driver (
hhstream-pointer) is a Wayland client of the same session that creates onezwlr_virtual_pointer_v1per output. It holds no lease and no session state: the broker decides, the driver executes. It is a separate process because a Wayland client needs its own connection and a driver blocked on the compositor must not stall session lifecycle.
Why containers are outputs
A session's container is a headless output, not just a workspace, and the two consequences are the reason:
grim -o hh-<id>captures exactly one session, so one agent's screenshot cannot contain another's window;zwlr_virtual_pointer_manager_v1version 2 creates a pointer bound to an output, so a warp to (0.5, 0.5) is the middle of that session's screen and not the middle of the desktop. Version 1 is refused rather than used, because its coordinates are global and every click would land somewhere plausible and wrong.
The cursor itself is singular — there is one seat — so pointer access is serialised by a broker-wide lease: one holder, a TTL the broker enforces with its own sweeper, and buttons lifted on release or expiry. The lease disciplines these sessions; it does not enforce against a hostile client, which can create its own virtual pointer (that is what sandboxing, not the lease, would fix).
Why one frame, not a queue
The server keeps a single slot holding the most recent frame. Each client thread
sends whatever is in that slot when it is ready. A client that cannot keep up
therefore misses frames instead of forcing the server to buffer them: memory use
does not grow with the number of stalled clients, and a stalled client cannot
delay the others. See docs/CONTRACT.md for exactly what a client observes.
Capture
Capturing is a separate program (by default grim, a wlr-screencopy client) run
inside the compositor's session and pointed at stdout. That choice is what keeps
hhstream free of Wayland and GPU code — the awkward part lives in a tool that
already exists and is already tested — and it is why the capture command is a
module option: tests inject a fake, and a future backend (a native screencopy
client, a hardware encoder) is a command-line swap rather than a rewrite.
The hardware requirement, stated plainly
Hyprland 0.56.2 asks aquamarine for its headless backend as mandatory
(src/Compositor.cpp) and does not accept the DRM backend if it is
unavailable. Aquamarine's headless backend still needs an EGL/GBM render
node; there is no software-only path that works without one. Consequently a
host with no graphics device at all (/dev/dri missing) cannot run this, and
Pyprland fails with CBackend::create() failed! before any of its managers come
up.
So the requirements are:
- a render node, i.e.
/dev/dri/renderD*— from a real GPU, a virtual GPU (virtio-gpu,virtio-gpu-gl, QXL) or a NixOS test VM's own QEMU display; - the
video/rendergroups for whichever user runs it (the module sets them).
Testing, and what each layer proves
| Layer | Proves |
|---|---|
tests/unit |
the framing, the capture wrapper and the server's client handling, with no compositor and no GPU |
checks.vm-basic |
the module actually starts both units, the socket appears with the right owner/mode, the Hello parses and two frames arrive — with a fake capture program |
checks.vm-hyprland |
the real thing: headless Hyprland comes up in the VM and grim captures a frame of the configured size |
checks.vm-sessions |
the session broker side: a real application runs as a tracked session on the compositor, the compositor's IPC sees its window, the idle reaper fires for real (and does not fire when the session is touched), and a broker restart adopts its sessions back |
checks.vm-ipc |
both IPC sockets exist at the names the contract freezes and fit in sun_path; hyprctl answers; and a subscriber on the event socket receives an openwindow for a window the test creates — the one assertion that can tell a working event socket from a silently truncated one |
checks.vm-containers |
one hh-* output per session at the container mode, the application's window on it, a second window of the same application beside the first, an unmatched window quarantined instead of landing on whoever had focus, grim -o isolating one container, and teardown removing the output and releasing its workspace slot |
checks.vm-pointer |
the driver binds a version-2 virtual pointer; acquire warps into the container and restores from the bookmark; a click arrives at the application, which reports the coordinates it was delivered at; a second acquire is BUSY naming the holder; an expired lease is swept and its held button lifted; a broker restart leaves the lock free, the bookmark intact and the driver reachable |
The three session checks share one guest (checks/lib/session-machine.nix) and
one set of test-script helpers (checks/lib/session-prelude.nix); the helpers
contain no assertions, so each check's script is still a complete account of
what it proves.
vm-hyprland is the only check that can fail for reasons outside this repo, so
it is kept separate from vm-basic on purpose: when it fails, the compositor's
log is the answer and the other two layers are already known good.
Run the VM checks one at a time. Each boots a guest with a software-rendered compositor; two at once on a two-core machine make the timing-sensitive assertions flake, and a flaky green is worth less than a slow one.