From 5194e5c3c511a9c0f8eaa928d3c73bf70f43a932 Mon Sep 17 00:00:00 2001 From: Ari Sosnovsky Date: Wed, 8 May 2024 16:42:26 -0400 Subject: [PATCH] latest --- configs/hypr/hypridle.conf | 13 ++++ configs/hypr/hyprland.conf | 8 ++- configs/hypr/hyprlock.conf | 86 ++++++++++++++++++++++++++ configs/hypr/monitors.conf | 4 +- configs/nwg-bar/bar.json | 11 +++- configs/nwg-panel/config | 120 ++++++++++++++++--------------------- 6 files changed, 167 insertions(+), 75 deletions(-) create mode 100644 configs/hypr/hyprlock.conf diff --git a/configs/hypr/hypridle.conf b/configs/hypr/hypridle.conf index e69de29..44c1fc0 100644 --- a/configs/hypr/hypridle.conf +++ b/configs/hypr/hypridle.conf @@ -0,0 +1,13 @@ +general { + lock_cmd = notify-send "hyprctl notify 0 5000 'rgb(ff0000)' 'Locking...'" # dbus/sysd lock command (loginctl lock-session) + # unlock_cmd = notify-send "unlock!" # same as above, but unlock + before_sleep_cmd = notify-send "hyprctl notify 0 5000 'rgb(ff0000)' 'Going to sleep...'" # command ran before sleep + # after_sleep_cmd = notify-send "Awake!" # command ran after sleep + ignore_dbus_inhibit = false # whether to ignore dbus-sent idle-inhibit requests (used by e.g. firefox or steam) +} + +listener { + timeout = 500 # in seconds + on-timeout = notify-send "You are idle!" # command to run when timeout has passed + on-resume = notify-send "Welcome back!" # command to run when activity is detected after timeout has fired. +} \ No newline at end of file diff --git a/configs/hypr/hyprland.conf b/configs/hypr/hyprland.conf index 11b7794..19f852b 100644 --- a/configs/hypr/hyprland.conf +++ b/configs/hypr/hyprland.conf @@ -5,8 +5,9 @@ monitor=,preferred,auto,auto # See https://wiki.hyprland.org/Configuring/Keywords/ for more # Execute your favorite apps at launch exec-once = lxqt-policykit-agent -exec-once = nm-applet --indicator & -exec-once = nwg-panel -d & nwg-dock-hyprland +exec-once = nwg-panel +exec-once = nwg-dock-hyprland -d -nolauncher +exec-once = nm-applet --indicator exec-once = dunst # Window rules @@ -16,6 +17,9 @@ windowrulev2 = float,class:(pavucontrol) windowrulev2 = float,class:(system-config-printer) windowrulev2 = float,class:(amdgpu_top) windowrulev2 = float,class:(float) +windowrulev2 = float,class:(nwg-.*) +windowrulev2 = float,class:(org\.kde\..*) +windowrulev2 = float,class:(.*blueman.*) windowrulev2 = size 40%,40%,class:(pavucontrol) windowrulev2 = center,class:(pavucontrol) windowrulev2 = fakefullscreen,class:(Code) diff --git a/configs/hypr/hyprlock.conf b/configs/hypr/hyprlock.conf new file mode 100644 index 0000000..4f3ac04 --- /dev/null +++ b/configs/hypr/hyprlock.conf @@ -0,0 +1,86 @@ +background { + monitor = + path = /mnt/Data/Pictures/LockScreen.jpg + color = rgba(25, 20, 20, 1.0) + + # all these options are taken from hyprland, see https://wiki.hyprland.org/Configuring/Variables/#blur for explanations + blur_passes = 0 # 0 disables blurring + blur_size = 7 + noise = 0.0117 + contrast = 0.8916 + brightness = 0.8172 + vibrancy = 0.1696 + vibrancy_darkness = 0.0 +} +image { + monitor = + path = /mnt/Data/Pictures/LockScreen.jpg + size = 150 # lesser side if not 1:1 ratio + rounding = -1 # negative values mean circle + border_size = 4 + border_color = rgb(221, 221, 221) + rotate = 0 # degrees, counter-clockwise + reload_time = -1 # seconds between reloading, 0 to reload with SIGUSR2 + reload_cmd = # command to get new path. if empty, old path will be used. don't run "follow" commands like tail -F + + position = 0, 200 + halign = center + valign = center +} +shape { + monitor = + size = 360, 60 + color = rgba(17, 17, 17, 1.0) + rounding = -1 + border_size = 8 + border_color = rgba(0, 207, 230, 1.0) + rotate = 0 + xray = false # if true, make a "hole" in the background (rectangle of specified size, no rotation) + + position = 0, 80 + halign = center + valign = center +} +input-field { + monitor = + size = 200, 50 + outline_thickness = 3 + dots_size = 0.33 # Scale of input-field height, 0.2 - 0.8 + dots_spacing = 0.15 # Scale of dots' absolute size, 0.0 - 1.0 + dots_center = false + dots_rounding = -1 # -1 default circle, -2 follow input-field rounding + outer_color = rgb(151515) + inner_color = rgb(200, 200, 200) + font_color = rgb(10, 10, 10) + fade_on_empty = true + fade_timeout = 1000 # Milliseconds before fade_on_empty is triggered. + placeholder_text = Input Password... # Text rendered in the input box when it's empty. + hide_input = false + rounding = -1 # -1 means complete rounding (circle/oval) + check_color = rgb(204, 136, 34) + fail_color = rgb(204, 34, 34) # if authentication failed, changes outer_color and fail message color + fail_text = $FAIL ($ATTEMPTS) # can be set to empty + fail_transition = 300 # transition time in ms between normal outer_color and fail_color + capslock_color = -1 + numlock_color = -1 + bothlock_color = -1 # when both locks are active. -1 means don't change outer color (same for above) + invert_numlock = false # change color if numlock is off + swap_font_color = false # see below + + position = 0, -20 + halign = center + valign = center +} + +label { + monitor = + text = Hi there, $USER + text_align = center # center/right or any value for default left. multi-line text alignment inside label container + color = rgba(200, 200, 200, 1.0) + font_size = 25 + font_family = Noto Sans + rotate = 0 # degrees, counter-clockwise + position = 0, 80 + halign = center + valign = center +} \ No newline at end of file diff --git a/configs/hypr/monitors.conf b/configs/hypr/monitors.conf index 10a0712..793f469 100644 --- a/configs/hypr/monitors.conf +++ b/configs/hypr/monitors.conf @@ -1,4 +1,4 @@ # Generated by nwg-displays on 2024-05-01 at 12:31:53. Do not edit manually. -monitor=eDP-1,2256x1504,0x0,1.175 -monitor=DP-*,preferred,0x-1098,auto +monitor=eDP-1,2256x1504,0x0,1 +monitor=DP-9,preferred,0x-1098,auto diff --git a/configs/nwg-bar/bar.json b/configs/nwg-bar/bar.json index ffbafc0..11938f6 100644 --- a/configs/nwg-bar/bar.json +++ b/configs/nwg-bar/bar.json @@ -1,4 +1,14 @@ [ + { + "label": "Suspend", + "exec": "systemctl suspend", + "icon": "/nix/store/xl4m836jpyzq43azychrbbjjq1j7d0zq-nwg-bar-0.1.6/share/nwg-bar/images/system-suspend.svg" + }, + { + "label": "Hibernate", + "exec": "systemctl hibernate", + "icon": "/nix/store/xl4m836jpyzq43azychrbbjjq1j7d0zq-nwg-bar-0.1.6/share/nwg-bar/images/system-hibernate.svg" + }, { "label": "Logout", "exec": "hyprctl dispatch exit", @@ -14,5 +24,4 @@ "exec": "systemctl -i poweroff", "icon": "/nix/store/xl4m836jpyzq43azychrbbjjq1j7d0zq-nwg-bar-0.1.6/share/nwg-bar/images/system-shutdown.svg" } -] ] \ No newline at end of file diff --git a/configs/nwg-panel/config b/configs/nwg-panel/config index f8676b7..daeaa79 100644 --- a/configs/nwg-panel/config +++ b/configs/nwg-panel/config @@ -20,20 +20,16 @@ "hyprland-workspaces" ], "modules-center": [ - "clock", - "executor-memory", - "executor-temp", - "executor-cpuav" - ], - "modules-right": [ - "tray", - "keyboard-layout" + "clock" ], + "modules-right": [], "controls-settings": { "components": [ "brightness", "volume", - "battery" + "battery", + "per-app-volume", + "processes" ], "commands": { "battery": "" @@ -41,76 +37,48 @@ "show-values": false, "interval": 1, "icon-size": 16, - "hover-opens": false, + "hover-opens": true, "leave-closes": true, - "click-closes": false, + "click-closes": true, "css-name": "controls-window", "custom-items": [ { "name": "Panel settings", "icon": "nwg-panel", "cmd": "nwg-panel-config" + }, + { + "name": "Exit", + "icon": "system-shutdown-symbolic", + "cmd": "nwg-bar" } ], + "show-brightness": true, + "show-volume": true, + "show-battery": true, + "output-switcher": true, + "per-app-volume": false, + "backlight-controller": "brightnessctl", + "backlight-device": "", + "window-width": 0, + "window-margin-horizontal": 0, + "window-margin-vertical": 0, + "root-css-name": "controls-overview", + "battery-low-level": 20, + "battery-low-interval": 3, + "processes-label": "Processes", + "readme-label": "README", + "angle": 0.0, "menu": { "name": "Exit", "icon": "system-shutdown-symbolic", - "items": [ - { - "name": "Logout", - "cmd": "hyprctl dispatch exit" - }, - { - "name": "Reboot", - "cmd": "systemctl reboot" - }, - { - "name": "Shutdown", - "cmd": "systemctl -i poweroff" - } - ] + "items": [] } }, "tray": { "root-css-name": "tray", "inner-css-name": "inner-tray" }, - "sway-taskbar": { - "workspace-menu": [ - "1", - "2", - "3", - "4", - "5", - "6", - "7", - "8" - ], - "name-max-len": 20, - "image-size": 16, - "workspaces-spacing": 0, - "task-padding": 0, - "show-app-icon": true, - "show-app-name": true, - "show-layout": true, - "workspace-buttons": false, - "all-workspaces": true, - "mark-autotiling": true, - "mark-xwayland": true, - "all-outputs": true - }, - "sway-workspaces": { - "numbers": [ - "1", - "2", - "3", - "4", - "5", - "6", - "7", - "8" - ] - }, "clock": { "format": "%a, %d. %b %H:%M:%S", "tooltip-text": "", @@ -142,15 +110,7 @@ "label-css-name": "", "interval": 1 }, - "button-sample": { - "command": "notify-send 'sample button'", - "icon": "view-grid", - "label": "", - "label-position": "right", - "css-name": "button-custom", - "icon-size": 16 - }, - "menu-start": "left", + "menu-start": "off", "exclusive-zone": true, "sigrt": 64, "use-sigrt": false, @@ -255,6 +215,26 @@ "css-name": "", "icon-size": 16, "icon-placement": "right" + }, + "sway-taskbar": {}, + "sway-workspaces": {}, + "menu-start-settings": { + "cmd-lock": "hyprlock -q", + "cmd-logout": "hyprctl dispatch exit", + "cmd-restart": "systemctl reboot", + "cmd-shutdown": "systemctl -i poweroff", + "autohide": false, + "file-manager": "dolphin", + "icon-size-large": 32, + "icon-size-small": 16, + "icon-size-button": 20, + "margin-bottom": 0, + "margin-left": 0, + "margin-right": 0, + "margin-top": 0, + "padding": 2, + "terminal": "kitty", + "run-through-compositor": false } } ] \ No newline at end of file